TRUDESIGN
Connector T-Piece Threaded MFF
The 1½" Threaded T-Piece features 2x female threads and 1x male thread enabling them to be joined together to create manifolds – useful for multiple hose connections to a single ball valve & thru-hull fitting. The centre female thread is shorter and designed for use with TruDesign Aquavalve Tails (Straight, 90°, and 120°) giving the option of tail sizes from 19mm up to 38mm. The TruDesign Plug, or Threaded Connector can also be used in the centre connection.
NOTE: all Aquavalve Tails that are used with the T-Piece do not face-seal using the Red or Blue washer as they do when used in Aquavalves. Instead, use a suitable thread sealant or PTFE tape to seal threads. The 1½" Male and Female threads at each end are also parallel and designed to seal through the use of a suitable sealant or PTFE tape allowing any orientation of the two joined parts. Do not overtighten!
FEATURES
- Manufactured from a glass reinforced nylon composite - high strength and light weight
- Immune to corrosion and electrolysis - long life with no concerns over decreased performance due to corrosion
- Chemical resistant - impervious to diesel, petrol and antifouling paints
- UV resistant - these fittings will not break down with ultraviolet light or discolour from the sun
- High quality surface finish - will not discolour with green film as similar bronze fittings do
- Fits TruDesign Ball Valves & BSP or NPS parallel threads - universal compatibility to other TruDesign fittings, and other marine components
- Large operating temperature range - suitable for all marine environments, from -40°C to +110°C